Wood Glue Spreader Factories - Gluing Spreader – Gladline

Short Description:

Product Detail

Product Tags

Feedback (2)

We have been proud from the higher consumer gratification and wide acceptance due to our persistent pursuit of high quality both on product or service and service for Wood Planer , Heavy Duty Sanding Machine , Edge Bander , With superb service and quality, and an enterprise of foreign trade featuring validity and competitiveness, that will be trusted and welcomed by its clients and creates happiness to its employees.

Wood Glue Spreader Factories - Gluing Spreader – Gladline Detail:

Specification:

Technical Data	MT6106	MT6206	MT6113	MT6213
Surface	Single	Double	Single	Double
Max glue spreading width /mm	600	600	1300	1300
Max working thickness /mm	60	60	60	60
Rubber roller diameter /mm	200	200	200	200
Glue spreading speed /m/min	24	24	23	23
Motor power /kw	1.5	1.5	2.2	2.2
Overall dimension /mm	11508001300	11509701300	21009001300	210010001300
Net weight /kg	400	400	600	600

Gluing Spreader Instruction:

1. The gluing spreader should be inspected every day before use. If foreign matter is found, it should be cleaned up in time to check whether the equipment is lubricated normally and whether the moving parts are running flexibly.

2. After the test run is normal, inject the glue into the glue tank, and then adjust the gap between the glue rollers according to the thickness of the veneer and the viscosity of the glue, and

The gap between the glue roller and the glue roller.

3. Care should be taken to clean the surface of the veneer during the gluing process to prevent sharp debris from scratching the rubber layer on the surface of the gluing roller; the surface grooves of the rubber layer caused by long-term use should be repaired in time.

4. After a long period of shutdown and the end of daily work, in order to prevent the glue from solidifying, the gluing spreader should be thoroughly cleaned, and the glue roller, squeeze roller and glue tank should be cleaned, and the glue sprayed all over the fuselage should be cleaned. It also needs to be completely removed. After cleaning, pay attention to wipe dry water stains to prevent rust.

5. When the gluing spreader is out of service, it should be restored to the factory state; adjust the upper glue roller and squeeze roller back to the initial position, rotate the adjustment nut of the glue roller and the adjustment sleeve of the squeeze roller to adjust the glue roller The compression spring and the squeezing roller top spring are completely relaxed, and all parts are fully lubricated and equipment maintenance is carried out.

Veneer gluing is an important process in the production of plywood. The quality of gluing not only affects the veneer’s bonding strength and the physical and mechanical properties of the plywood, but also affects the production cost of the plywood. Therefore, mastering the structure and working principle of the veneer gluing machine and the adjustments related to the glue quality will help to use the veneer gluing machine correctly and rationally.

Product detail pictures:

Related Product Guide:

That has a positive and progressive attitude to customer's interest, our organization consistently improves our products quality to satisfy the demands of shoppers and further focuses on safety, reliability, environmental specifications, and innovation of Wood Glue Spreader Factories - Gluing Spreader – Gladline, The product will supply to all over the world, such as: Washington, Uganda, Lahore, Due to our dedication, our products are well known throughout the world and our export volume continuously grows every year. We will continue to strive for excellence by providing high quality products that will exceed the expectation of our customers.

Cheap Glue Spreader Machine