Wholesale Wood Glue Spreader - Gluing Spreader – Gladline
Wholesale Wood Glue Spreader - Gluing Spreader – Gladline Detail:
Specification:
|
Technical Data |
MT6106 |
MT6206 |
MT6113 |
MT6213 |
| Surface | Single | Double | Single | Double |
| Max glue spreading width /mm | 600 | 600 | 1300 | 1300 |
| Max working thickness /mm | 60 | 60 | 60 | 60 |
| Rubber roller diameter /mm | 200 | 200 | 200 | 200 |
| Glue spreading speed /m/min | 24 | 24 | 23 | 23 |
| Motor power /kw | 1.5 | 1.5 | 2.2 | 2.2 |
| Overall dimension /mm | 1150*800*1300 | 1150*970*1300 | 2100*900*1300 | 2100*1000*1300 |
| Net weight /kg | 400 | 400 | 600 | 600 |
Gluing Spreader Instruction:
1. The gluing spreader should be inspected every day before use. If foreign matter is found, it should be cleaned up in time to check whether the equipment is lubricated normally and whether the moving parts are running flexibly.
2. After the test run is normal, inject the glue into the glue tank, and then adjust the gap between the glue rollers according to the thickness of the veneer and the viscosity of the glue, and
The gap between the glue roller and the glue roller.
3. Care should be taken to clean the surface of the veneer during the gluing process to prevent sharp debris from scratching the rubber layer on the surface of the gluing roller; the surface grooves of the rubber layer caused by long-term use should be repaired in time.
4. After a long period of shutdown and the end of daily work, in order to prevent the glue from solidifying, the gluing spreader should be thoroughly cleaned, and the glue roller, squeeze roller and glue tank should be cleaned, and the glue sprayed all over the fuselage should be cleaned. It also needs to be completely removed. After cleaning, pay attention to wipe dry water stains to prevent rust.
5. When the gluing spreader is out of service, it should be restored to the factory state; adjust the upper glue roller and squeeze roller back to the initial position, rotate the adjustment nut of the glue roller and the adjustment sleeve of the squeeze roller to adjust the glue roller The compression spring and the squeezing roller top spring are completely relaxed, and all parts are fully lubricated and equipment maintenance is carried out.
Veneer gluing is an important process in the production of plywood. The quality of gluing not only affects the veneer’s bonding strength and the physical and mechanical properties of the plywood, but also affects the production cost of the plywood. Therefore, mastering the structure and working principle of the veneer gluing machine and the adjustments related to the glue quality will help to use the veneer gluing machine correctly and rationally.
Product detail pictures:
Related Product Guide:
In order to give you convenience and enlarge our business, we also have inspectors in QC Team and assure you our best service and product for Wholesale Wood Glue Spreader - Gluing Spreader – Gladline, The product will supply to all over the world, such as: Mexico, Nigeria, Tajikistan, Our company sticks to the principle of "high quality, reasonable price and timely delivery". We sincerely hope to establish good cooperative relationships with our new and old business partners from all parts of the world. We hope to work with you and serve you with our excellent goods and services. Welcome to join us!
By Annabelle from Lithuania - 2018.12.22 12:52
This is the first business after our company establish, products and services are very satisfying, we have a good start, we hope to cooperate continuous in the future!
By Ivan from Ghana - 2017.08.18 18:38
