The production material of the automatic edge banding machine itself is metal, and the object of its operation is also metal. The working principle is to use the frictional impact between metals to achieve the purpose of cleaning and optimization, so it is impossible for the edge banding machine to wear during the working process. Avoid and wear and tear will be more serious. Then the main point of the maintenance problem is the use of moisturizing oil. The purpose of adding lubricating oil is to slow down the wear degree of the machine and prolong its scrapping time. However, the lubricating oil should not be used excessively and the effect of improving wear and tear is not particularly obvious. Therefore, the key is to maintain the accessories of the edge banding machine. The machine should be inspected regularly and the damaged components should be replaced in time, especially the damaged steel balls should be replaced in time, otherwise the damaged steel balls will wear out the castings.
Note on the maintenance of the automatic edge banding machine: First, check regularly. Only when the problem is found before the problem occurs can it be repaired to ensure that the edge banding machine can work normally. In addition, when the accessories of the edge banding machine are replaced, in order to ensure that the edge banding machine will not have mechanical failures caused by accessories problems during the use of the edge banding machine, it is necessary to replace the parts with serious wear in time. The technical content of the edge banding machine is relatively high, so there are more requirements for the operators. The workers must be certified to work to ensure safety.
Gladline machinery is an experienced woodworking machinery manufacturer, any inquiry please feel free to contact us!
Post time: May-17-2022