Low price for Thicknesser - Surface planer – Gladline
Low price for Thicknesser - Surface planer – Gladline Detail:
Specification:
MODEL | GSP523F | GSP 524F | GSP 525F |
Max. planning width | 300mm | 400mm | 500mm |
Max. planning depth | 4mm | 5mm | 5mm |
Spindle speed | 5600r/min | 5000r/min | 5000r/min |
Number of blades | 3 | 4 | 4 |
Cutting diameter | 87mm | 102mm | 102mm |
Total length of worktable | 1800mm | 2500mm | 2500mm |
Motor Power | 2.2kw | 3.0kw | 4.0kw |
Motor speed | 2840r/min | 2880r/min | 2890r/min |
Overall dimension | 1800*740*1010mm | 2500*810*1050mm | 2500*910*1050mm |
Net weight | 300kg | 450kg | 550kg |
The Surface Planer is used to plan a datum plane or two orthogonal planes of the workpiece. The electric motor drives the planer shaft to rotate at a high speed through the belt, and the workpiece is pressed by the hand to feed the planer shaft along the guide plate close to the front table. The front worktable is lower than the rear worktable, and the height is adjustable. The height difference is the thickness of the planning layer. Adjusting the guide plate can change the processing width and angle of the workpiece. The flat planer is mainly used for the processing of the spliced surface of the board.
Surface Planer maintenance
1. Clean the inside and outside of the machine.
2. Check whether the tool installation is firm and reliable.
3. Check whether the electrical switches and circuits are normal or not damaged.
4. Check whether the positioning bracket is loose.
5. Check whether the motor is running normally, whether there is vibration or abnormal noise.
Surface Planer: It can ensure that the processed surface of the wool is processed into a flat surface. Make the processed surface the reference plane required by the subsequent process. It is also possible to plan a certain angle between the reference surface and its adjacent surface, and the processing of the adjacent surface can be used as an auxiliary reference surface.
Press planer: The single-sided press planer is used to plan the opposite surface of the workpiece surface that has been processed by the planer, and cut the square material and plate into a certain thickness. The double-sided planer is used to process the corresponding two sides of the workpiece at the same time.
Product detail pictures:
Related Product Guide:
We insist on offering premium quality manufacturing with superior business concept, honest product sales as well as finest and fast assistance. it will bring you not only the good quality product or service and huge profit, but the most significant is to occupy the endless market for Low price for Thicknesser - Surface planer – Gladline, The product will supply to all over the world, such as: Finland, Birmingham, Seychelles, In the future, we promise to keep offer the high quality and more cost-effective products, the more efficient after sales service to our all customers all over the world for the common development and the higher benefit.
By Cherry from Cape Town - 2017.10.13 10:47
The product classification is very detailed that can be very accurate to meet our demand, a professional wholesaler.
By Roxanne from Honduras - 2017.05.21 12:31