Glue Spreader Company - Gluing Spreader – Gladline
Glue Spreader Company - Gluing Spreader – Gladline Detail:
Specification:
|
Technical Data |
MT6106 |
MT6206 |
MT6113 |
MT6213 |
| Surface | Single | Double | Single | Double |
| Max glue spreading width /mm | 600 | 600 | 1300 | 1300 |
| Max working thickness /mm | 60 | 60 | 60 | 60 |
| Rubber roller diameter /mm | 200 | 200 | 200 | 200 |
| Glue spreading speed /m/min | 24 | 24 | 23 | 23 |
| Motor power /kw | 1.5 | 1.5 | 2.2 | 2.2 |
| Overall dimension /mm | 1150*800*1300 | 1150*970*1300 | 2100*900*1300 | 2100*1000*1300 |
| Net weight /kg | 400 | 400 | 600 | 600 |
Gluing Spreader Instruction:
1. The gluing spreader should be inspected every day before use. If foreign matter is found, it should be cleaned up in time to check whether the equipment is lubricated normally and whether the moving parts are running flexibly.
2. After the test run is normal, inject the glue into the glue tank, and then adjust the gap between the glue rollers according to the thickness of the veneer and the viscosity of the glue, and
The gap between the glue roller and the glue roller.
3. Care should be taken to clean the surface of the veneer during the gluing process to prevent sharp debris from scratching the rubber layer on the surface of the gluing roller; the surface grooves of the rubber layer caused by long-term use should be repaired in time.
4. After a long period of shutdown and the end of daily work, in order to prevent the glue from solidifying, the gluing spreader should be thoroughly cleaned, and the glue roller, squeeze roller and glue tank should be cleaned, and the glue sprayed all over the fuselage should be cleaned. It also needs to be completely removed. After cleaning, pay attention to wipe dry water stains to prevent rust.
5. When the gluing spreader is out of service, it should be restored to the factory state; adjust the upper glue roller and squeeze roller back to the initial position, rotate the adjustment nut of the glue roller and the adjustment sleeve of the squeeze roller to adjust the glue roller The compression spring and the squeezing roller top spring are completely relaxed, and all parts are fully lubricated and equipment maintenance is carried out.
Veneer gluing is an important process in the production of plywood. The quality of gluing not only affects the veneer’s bonding strength and the physical and mechanical properties of the plywood, but also affects the production cost of the plywood. Therefore, mastering the structure and working principle of the veneer gluing machine and the adjustments related to the glue quality will help to use the veneer gluing machine correctly and rationally.
Product detail pictures:
Related Product Guide:
Our concentrate on is always to consolidate and enhance the excellent and service of present solutions, in the meantime regularly develop new products to meet distinctive customers' demands for Glue Spreader Company - Gluing Spreader – Gladline, The product will supply to all over the world, such as: Cape Town, Saudi Arabia, South Africa, Our factory is equipped with complete facility in 10000 square meters, which makes us be able to satisfy the producing and sales for most auto part solutions. Our advantage is full category, high quality and competitive price! Based on that, our products win a high admiration both at home and abroad.
By Elaine from Casablanca - 2018.12.10 19:03
We have been looking for a professional and responsible supplier, and now we find it.
By Althea from Poland - 2017.06.16 18:23
