Factory source Wood Dust Collector - Surface planer – Gladline
Factory source Wood Dust Collector - Surface planer – Gladline Detail:
Specification:
| MODEL | GSP523F | GSP 524F | GSP 525F |
| Max. planning width | 300mm | 400mm | 500mm |
| Max. planning depth | 4mm | 5mm | 5mm |
| Spindle speed | 5600r/min | 5000r/min | 5000r/min |
| Number of blades | 3 | 4 | 4 |
| Cutting diameter | 87mm | 102mm | 102mm |
| Total length of worktable | 1800mm | 2500mm | 2500mm |
| Motor Power | 2.2kw | 3.0kw | 4.0kw |
| Motor speed | 2840r/min | 2880r/min | 2890r/min |
| Overall dimension | 1800*740*1010mm | 2500*810*1050mm | 2500*910*1050mm |
| Net weight | 300kg | 450kg | 550kg |
The Surface Planer is used to plan a datum plane or two orthogonal planes of the workpiece. The electric motor drives the planer shaft to rotate at a high speed through the belt, and the workpiece is pressed by the hand to feed the planer shaft along the guide plate close to the front table. The front worktable is lower than the rear worktable, and the height is adjustable. The height difference is the thickness of the planning layer. Adjusting the guide plate can change the processing width and angle of the workpiece. The flat planer is mainly used for the processing of the spliced surface of the board.
Surface Planer maintenance
1. Clean the inside and outside of the machine.
2. Check whether the tool installation is firm and reliable.
3. Check whether the electrical switches and circuits are normal or not damaged.
4. Check whether the positioning bracket is loose.
5. Check whether the motor is running normally, whether there is vibration or abnormal noise.
Surface Planer: It can ensure that the processed surface of the wool is processed into a flat surface. Make the processed surface the reference plane required by the subsequent process. It is also possible to plan a certain angle between the reference surface and its adjacent surface, and the processing of the adjacent surface can be used as an auxiliary reference surface.
Press planer: The single-sided press planer is used to plan the opposite surface of the workpiece surface that has been processed by the planer, and cut the square material and plate into a certain thickness. The double-sided planer is used to process the corresponding two sides of the workpiece at the same time.
Product detail pictures:
Related Product Guide:
Good quality comes 1st; assistance is foremost; business enterprise is cooperation" is our business enterprise philosophy which is regularly observed and pursued by our company for Factory source Wood Dust Collector - Surface planer – Gladline, The product will supply to all over the world, such as: Romania, Argentina, French, With strong technical strength and advanced production equipment, and SMS people purposefully , qualified, dedicated spirit of enterprise. Enterprises took the lead through the ISO 9001:2008 international quality management system certification, CE certification EU ; CCC.SGS.CQC other related product certification. We look forward to reactivating our company connection.
By Mark from Niger - 2017.08.28 16:02
This supplier's raw material quality is stable and reliable, has always been in accordance with the requirements of our company to provide the goods that quality meet our requirements.
By Sophia from Benin - 2018.06.28 19:27
