Cold Press Laminating Machine Pricelist - Cold Press Machine – Gladline

Cold Press Machine is used for furniture production, wood industry, flat plywood, plywood, particle board, veneer and other wooden glued pressed parts. With high production efficiency and good quality, it is suitable for the production of wood products in various furniture production units and other industries.

Specification:

Cold press machine, that is, compressor of refrigeration and dryer. The amount of water vapor in the compressed air is determined by the temperature of the compressed air: while keeping the compressed air pressure basically unchanged, lowering the temperature of the compressed air can reduce the water vapor content in the compressed air, and the excess water vapor will condense Into liquid. The cold dryer (refrigerated dryer) uses this principle to use refrigeration technology to dry compressed air.

The Cold press machine is used to cold press and bond furniture panels. And leveling. Stereotyped. For wooden doors and various boards, it has good pressing quality, fast speed and high efficiency. It is widely used in furniture manufacturers, door manufacturers, decorative panels and other panel production industries.

The Cold press machine should meet the following points in normal operation:

1.Hydraulic oil is required to be suitable for the oil quality of the cold press machine, generally 45﹟anti-wear hydraulic oil is used.

2.The oil quality of the cold press machine needs to be updated once a year to ensure the normal operation of the machine.

3.Other parts should be maintained regularly.

4.Pay attention to the lighting during work, so that the operator and staff can clearly see the meter numbers of the electric control box, and try not to leave dead corners. Clean and bright lights are required in the cold press workshop.

5.Check whether the equipment is in good condition every day.

6.Check whether there is oil participation every day, and maintain it in time.

7.Both parties to the shift must complete the handover and take it seriously. At the same time, record the handover situation, problems and operation status.