Cheap PriceList for Hydraulic Composer - Surface planer – Gladline
Cheap PriceList for Hydraulic Composer - Surface planer – Gladline Detail:
Specification:
MODEL | GSP523F | GSP 524F | GSP 525F |
Max. planning width | 300mm | 400mm | 500mm |
Max. planning depth | 4mm | 5mm | 5mm |
Spindle speed | 5600r/min | 5000r/min | 5000r/min |
Number of blades | 3 | 4 | 4 |
Cutting diameter | 87mm | 102mm | 102mm |
Total length of worktable | 1800mm | 2500mm | 2500mm |
Motor Power | 2.2kw | 3.0kw | 4.0kw |
Motor speed | 2840r/min | 2880r/min | 2890r/min |
Overall dimension | 1800*740*1010mm | 2500*810*1050mm | 2500*910*1050mm |
Net weight | 300kg | 450kg | 550kg |
The Surface Planer is used to plan a datum plane or two orthogonal planes of the workpiece. The electric motor drives the planer shaft to rotate at a high speed through the belt, and the workpiece is pressed by the hand to feed the planer shaft along the guide plate close to the front table. The front worktable is lower than the rear worktable, and the height is adjustable. The height difference is the thickness of the planning layer. Adjusting the guide plate can change the processing width and angle of the workpiece. The flat planer is mainly used for the processing of the spliced surface of the board.
Surface Planer maintenance
1. Clean the inside and outside of the machine.
2. Check whether the tool installation is firm and reliable.
3. Check whether the electrical switches and circuits are normal or not damaged.
4. Check whether the positioning bracket is loose.
5. Check whether the motor is running normally, whether there is vibration or abnormal noise.
Surface Planer: It can ensure that the processed surface of the wool is processed into a flat surface. Make the processed surface the reference plane required by the subsequent process. It is also possible to plan a certain angle between the reference surface and its adjacent surface, and the processing of the adjacent surface can be used as an auxiliary reference surface.
Press planer: The single-sided press planer is used to plan the opposite surface of the workpiece surface that has been processed by the planer, and cut the square material and plate into a certain thickness. The double-sided planer is used to process the corresponding two sides of the workpiece at the same time.
Product detail pictures:
Related Product Guide:
No matter new customer or outdated client, We believe in extensive phrase and trusted relationship for Cheap PriceList for Hydraulic Composer - Surface planer – Gladline, The product will supply to all over the world, such as: Colombia, Ethiopia, Turkmenistan, Please feel cost-free to send us your specifications and we'll respond to you asap. We've got a professional engineering team to serve for the every single detailed needs. Free samples may be sent for you personally to know far more facts. So that you can meet your desires, please really feel cost-free to contact us. You could send us emails and call us straight. Additionally, we welcome visits to our factory from all over the world for much better recognizing of our corporation. nd merchandise. In our trade with merchants of several countries, we often adhere to the principle of equality and mutual advantage. It is our hope to market, by joint efforts, both trade and friendship to our mutual benefit. We look forward to getting your inquiries.
By Elma from Russia - 2018.02.21 12:14
The sales manager is very patient, we communicated about three days before we decided to cooperate, finally, we are very satisfied with this cooperation!
By Elvira from Juventus - 2018.09.29 17:23