How to operate the CNC router machine for beginners

As a high-end cutting and engraving equipment, CNC router machine is deeply loved by furniture industry bosses, mainly because i CNC router machine can be used for milling and engraving of cabinet doors and wooden doors; in the production of panel furniture, CNC router machine can also be used to make vertical holes, Slots and materials. Today, the editor will introduce to you how to operate the CNC router machine correctly as a novice.

1. First turn on the CNC router machine power, then release the emergency stop button of the CNC slitting machine to ensure that the slitting machine is ready to start.

2. Second, open the computer connected to the CNC router machine, enter the established operating system, find the software that controls the device, and double-click to open the cutting machine software on the computer.

3. Check whether the CNC router machine system is normal. If there is any error message about the punching machine in the system, the punching machine can no longer be used to make it work until the cause of the error is found and corrected.

4. Measure whether the size of the workpiece exceeds the processing range of the CNC router machine, and adjust it. Once the workpiece is too large, it will affect the normal operation of the equipment to a large extent, and even more seriously, it may damage the CNC router machine.

5. Start the pressure device of the CNC router machine, and normal processing can only be done after the test is no problem.

The above five steps are the correct way to operate the CNC router machine. In fact, when the user receives the machine, the technician will arrive at the user’s factory for training, so the novice must earnestly accept the guidance of the manufacturer’s technician!


Post time: Mar-01-2022