The automatic edge banding machine is suitable for straight edge banding and trimming of medium density fiberboard, block board, solid wood board, particle board, polymer door panel, plywood, etc. Pressing, flushing, chamfering, rough trimming, fine trimming
With functions such as scraping and polishing, the edge sealing is fine and smooth, with good hand feeling, and the sealing line is straight and smooth. The equipment is stable, reliable and durable, and the price is moderate. It is especially suitable for manufacturers of large and medium-sized furniture, cabinets and other panel furniture.
Function introduction of each group of automatic edge banding machine:
Pre-milling: The ripple marks, burrs or non-perpendicular phenomena caused by panel saws and sizing saws are re-modified with double milling cutters to achieve better edge sealing effect. It makes the bonding between the edge band and the board more closely, and the integrity and aesthetics are better.
Glue-coated edge: Through the special structure, the edge-sealing plate and the edge-sealing material are evenly coated with glue on both sides to ensure stronger adhesion.
Straight head: through the precise linear guide motion, the automatic tracking of the mold and the fast cutting structure of the high-frequency high-speed motor are adopted to ensure that the cut surface is smooth and smooth.
Refining: All adopt the automatic tracking of the mold and the high-frequency high-speed motor structure to ensure the smoothness of the upper and lower parts of the trimmed plate. It is used to repair the excess edge banding material above and below the edge banding strip of the processed sheet. The finishing knife is an R-shaped knife. Mainly used for PVC and acrylic edge strips of panel furniture, preferably edge strips with a thickness of more than 0.8mm.
Scraping: It is used to eliminate the ripple marks caused by the cutting process of non-linear motion of trimming, so that the upper and lower parts of the plate are smoother and tidy.
Polishing: Clean the processed plate with a cotton polishing wheel, and make the edge-sealing end surface smoother by polishing.
Slotting: It is used for direct slotting of wardrobe side panels, bottom plates, etc., which is more convenient and quick to reduce the process of panel sawing; it can also be used for slotting aluminum edging of door panels.
The above is the introduction of the functions of each part of the automatic edge banding machine.
Post time: Mar-08-2022