Glue Spreader Companies - Gluing Spreader – Gladline
Glue Spreader Companies - Gluing Spreader – Gladline Detail:
Specification:
Technical Data |
MT6106 |
MT6206 |
MT6113 |
MT6213 |
Surface | Single | Double | Single | Double |
Max glue spreading width /mm | 600 | 600 | 1300 | 1300 |
Max working thickness /mm | 60 | 60 | 60 | 60 |
Rubber roller diameter /mm | 200 | 200 | 200 | 200 |
Glue spreading speed /m/min | 24 | 24 | 23 | 23 |
Motor power /kw | 1.5 | 1.5 | 2.2 | 2.2 |
Overall dimension /mm | 1150*800*1300 | 1150*970*1300 | 2100*900*1300 | 2100*1000*1300 |
Net weight /kg | 400 | 400 | 600 | 600 |
Gluing Spreader Instruction:
1. The gluing spreader should be inspected every day before use. If foreign matter is found, it should be cleaned up in time to check whether the equipment is lubricated normally and whether the moving parts are running flexibly.
2. After the test run is normal, inject the glue into the glue tank, and then adjust the gap between the glue rollers according to the thickness of the veneer and the viscosity of the glue, and
The gap between the glue roller and the glue roller.
3. Care should be taken to clean the surface of the veneer during the gluing process to prevent sharp debris from scratching the rubber layer on the surface of the gluing roller; the surface grooves of the rubber layer caused by long-term use should be repaired in time.
4. After a long period of shutdown and the end of daily work, in order to prevent the glue from solidifying, the gluing spreader should be thoroughly cleaned, and the glue roller, squeeze roller and glue tank should be cleaned, and the glue sprayed all over the fuselage should be cleaned. It also needs to be completely removed. After cleaning, pay attention to wipe dry water stains to prevent rust.
5. When the gluing spreader is out of service, it should be restored to the factory state; adjust the upper glue roller and squeeze roller back to the initial position, rotate the adjustment nut of the glue roller and the adjustment sleeve of the squeeze roller to adjust the glue roller The compression spring and the squeezing roller top spring are completely relaxed, and all parts are fully lubricated and equipment maintenance is carried out.
Veneer gluing is an important process in the production of plywood. The quality of gluing not only affects the veneer’s bonding strength and the physical and mechanical properties of the plywood, but also affects the production cost of the plywood. Therefore, mastering the structure and working principle of the veneer gluing machine and the adjustments related to the glue quality will help to use the veneer gluing machine correctly and rationally.
Product detail pictures:
Related Product Guide:
We're commitment to offer you the aggressive cost ,superb products and solutions top quality, too as fast delivery for Glue Spreader Companies - Gluing Spreader – Gladline, The product will supply to all over the world, such as: Jordan, Sri Lanka, Haiti, Our products are produced with the best raw materials. Every moment, we constantly improve the production programme. In order to ensure better quality and service, we have been focusing on the production process. We have got high praise by partner. We are looking forward to establishing business relationship with you.
By Megan from Hyderabad - 2017.07.07 13:00
Speaking of this cooperation with the Chinese manufacturer, I just want to say"well dodne", we are very satisfied.
By Mabel from Nepal - 2018.09.23 17:37